用户名: 密码:  泵阀行业营销型网站建设
当前位置:网站首页 -> 水泵系列 >> 离心泵

进口卫生级负压泵(欧美进口十大品牌)发布时间:2018-08-01 09:46:14

进口卫生级负压泵

英国GRIMM格林进口卫生级负压泵 UK GRIMM Imported sanitary negative pressure pump

英国GRIMM格林进口卫生负压泵概述: 

          进口卫生级负压泵属于涡轮导流离心式负压泵,可以负压0.09Mpa的压力下,抽取、输送真空容器罐内的液体物料。广泛使用于蒸发浓缩器、真空浓缩设备、降膜蒸发器系统中。负压泵材质由304或316L不锈钢制造而成。 

          应用现代新技术和新概念不断革新涡轮导流离心负压泵的生产工艺。新一代卫生级离心泵是英国格林的骄傲。因为它除了符合GMP要求,传统的质量外。为用户提供的泵性能更好,效率更高,使用寿命更长,用户受益更大。

英国GRIMM格林进口卫生负压泵特点: 
             进口卫生级负压泵属于涡轮导流离心负压泵,可以在负压0.09Mpa压力下,抽取真空罐里的液体。在处理过程中满足卫生要求,柔和不损伤物料,并具抗化学物性能强光泵业所有与物料接触的部分均使用SUS304,SUS316L的材质。其标准配置包括外壳和泵脚。卫生级负压泵是在标准离心泵基础上设计的高压泵,适用于高进口压力场合,可承受高达40bar的进口压力。本泵是设计开式叶轮,内部镜面抛光、无死角、清洗后无滞留物、噪音低。

英国GRIMM格林进口卫生级负压泵技术参数: 
规  格:3T-180T, 0.75KW-75KW
材  质:SUS304 SUS316L (在材料的选用上泵体、泵盖、叶轮等凡与物料接触之零件由SUS316L或SUSI304不锈钢制造)
标  准:DIN、 SMS
叶  轮:分开式叶轮和半闭式叶轮。
表面处理:接液部分抛光,其余亚光或喷砂处理。
工作条件:卫生离心泵属高低液位几水平输送,有一定吸力。 
最大进口压力:0.5MPa
温度范围:-10°C至+140°C(EPDM)
可冲洗机械密封:
       水压:最高0.1MPa
       水量:0.25-0.5L/min

表面处理:内接液部分抛光,其余亚光或喷砂处理
内表面处理:抛光
连接方式:螺纹活接,卡箍,法兰
过液密封材料:乙丙橡胶(EPDM),硅橡胶

应  用:属于涡轮导流离心负压泵,可以在负压0.09Mpa压力下,抽取真空罐里的液体。

英国GRIMM格林进口卫生负压泵电机:
1、根据配置主要采用“ABB,西门子,东元”品牌的三相交流电机,按照国际电工委员会IEC60034.IEC60072标准设计制作,符合欧共体“CE”标记要求。
2、可供选用防爆电机,以满足不同场合的需要。
3、优越的电气性能、低噪音、低震动,电机的标准设计防护等级为IP55,绝缘等级为F级。
4、工作电压:
      ≤3Kw,220-240V/380-420V,/Y
      >3Kw,380-420V/660-690V,/Y
5、频率:50Hz/60Hz
6、工作方式:连续(SI)
7、转速:标准泵的转速为2900r/min 

英国GRIMM格林进口卫生级负压泵应用:
药品类:输液,蒸馏水,高纯水,含颗粒3-6毫米的中药液体,浸出液;

化妆品类:染料,酒精,香精油;

乳品类:乳清,奶油,牛奶,糖液;

饮料类:酒精,白酒,啤酒,麦芽汁, 发酵液,果汁饮料,带颗粒饮料;

其它:糖果业,焙烤业,化工领域等。

UK GRIMM Imported sanitary negative pressure pump summary:

           The imported sanitary negative pressure pump belongs to the turbine guiding centrifugal negative pressure pump. It can extract and transport the liquid material in the vacuum container under the pressure of negative pressure 0.09Mpa. Widely used in evaporation concentrator, vacuum concentrating device, evaporator system. The material of negative pressure pump is made of 304 or 316L stainless steel.

        With modern new technology and new concept, the production process of turbine guided centrifugal negative pressure pump is continuously improved. A new generation of sanitary centrifugal pumps is the pride of Green. Because it meets the GMP requirements, outside of the traditional quality. To provide users with better performance, higher efficiency, longer service life, users benefit more.

UK GRIMM Imported sanitary negative pressure pump characteristic:

           The imported sanitary negative pressure pump belongs to the steam turbine centrifugal negative pressure pump. It can extract the liquid in the vacuum tank under the negative pressure of 0.09Mpa. In the process to meet health requirements, soft, no damage to the material, and with chemical resistance, light pump all parts of contact with materials are using SUS304, SUS316L material. Its standard configuration includes housings and pump feet. Sanitary negative pressure pump is a high pressure pump designed on the basis of standard centrifugal pump. It is suitable for high inlet pressure occasions and can bear up to 40bar of inlet pressure. The pump is designed to open impeller, the internal mirror polishing, no dead angle, cleaning after no detention, low noise.

UK GRIMM Imported sanitary negative pressure pump technical parameters:

Specification: 3T-180T, 0.75KW-75KW

Material: SUS304 SUS316L (in the selection of materials of the pump body, pump cover, impeller and other parts all contact with the material of stainless steel made by SUS316L or SUSI304)

Standard: DIN, SMS

Impeller: split impeller and semi closed impeller.

Surface treatment: wetted parts polishing, the matte or sandblasting.

Working conditions: sanitary centrifugal pump is of high and low liquid level. It has a certain suction.

Maximum inlet pressure: 0.5MPa

Temperature range: -10℃ to +140℃(EPDM)

Washable mechanical seal:

        Water pressure: maximum 0.1MPa

        Water quantity: 0.25-0.5L/min

Surface treatment: the remaining portion of the polishing liquid inscribed, matte or sandblasting

Internal finish: polishing

Connection: thread, live, clamp, flange

Liquid sealing material: ethylene propylene rubber (EPDM), silicone rubber

Application: it belongs to turbine centrifugal centrifugal pump, which can extract liquid from vacuum tank under negative pressure 0.09Mpa pressure.

UK GRIMM Imported sanitary negative pressure pump electric machinery:

1.According to the configuration, mainly using "ABB, SIEMENS, East yuan" brand three-phase AC motor, according to the International Electrotechnical Commission IEC60034.IEC60072 standard design and production, in line with EC "CE" mark requirements.

2.Explosion-proof motor can be used to meet the needs of different occasions.

3.Superior electrical performance, low noise, low vibration, motor standard design, protection level is IP55, insulation class is F level.

4.Work voltage:

            3Kw, 220-240V/380-420V, /Y

            3Kw, 380-420V/660-690V, /Y

5.Frequency: 50Hz/60Hz

6.Work: continuous (SI)

7.Speed: standard pump speed of 2900r/min

UK GRIMM Imported sanitary negative pressure pump application:

Medicine: infusion, distilled water, high pure water, containing 3-6 millimeters of Chinese medicine liquid, leaching solution;

Cosmetics: dyes, alcohol, essential oils;

Dairy products: milk, cream, whey, sugar;

Beverages: alcohol, spirits, beer, wort, fermented juice, fruit juice, and soft drinks;

Others: Confectionery, bakery, chemical, etc.

进口卫生级负压泵?官网:http://www.021fmc.cn/aspcms/product/2018-5-10/1334.html 

GRIMM中国:

    上海秉奇阀门有限公司GRIMM公司在中国的总代理,是中国拥有GRIMM代理权及销售权,主要为中国地区客户提供服务与技术支持,同时,秉奇人员也积极参与总部技术培训学习,并不断掌握产品原理、实际运作、工程技术做为基石,完善对中国地区客户需求。             

关于GRIMM

         英国格林(GRIMM)国际有限公司是亚太地区流体控制领域的主要生产和供应商之一,公司总部位于克莱福德,拥有一支有经验的研发队伍,实行全球统一设计,统一标准,在水泵领域内处于领先地位。在许多个国家均有生产水泵基地,中国由上海秉奇阀门负责中国市场各项业务与技术支持中心,同时向中国市场销售。

       英国格林(GRIMM)产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域,以及人们日常生活中。

       英国格林(GRIMM)主要产品有:管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。

服务体系:

GRIMM品质:

       GRIMM公司注重产品质量及使用寿命,全部采用先进制造技术和生产设备,并坚持不懈研发新产品,为确保不间断的全过程质量控制,在生产过程中采用(SPC)过程控制和(TQM)全面质量管理;GRIMM的严格规范实现了不让品质拖节,有效保障产品每个细节达到的性能指标。

GRIMM专业:

       掌握核心的流体控制技术,提供市场领先的产品、服务和解决方案,帮助用户提高效率,带来至关重要的基础设施。

GRIMM服务:

       我们与用户紧密合作,支持一系列系统使用技术和文件报告,提供售前、售中、售后服务和技术支持,有了您的信任与支持,我们将更完善、更高效提供水泵流体技术方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

About GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products he been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英国格林总代理商:上海秉奇阀门有限公司,微信咨询:

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:

 

Welcome new and old customers call negotiate!

Contacts:Huang Tianxiang

QQ:673088832

Mobile Phone:13524269805 (微信同号)

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District


搜索更多:进口卫生级负压泵

以下是上海秉奇泵阀有限公司信息发布人联系方式:

  • 免费企业会员
  • 上海秉奇泵阀有限公司
  • 进口隔膜泵,进口真空泵,进口潜污泵,进口计量泵,进口耐腐蚀泵
  • 黄天翔
  • 上海>>上海
  • 021-51698378
  • http://www.021fmc.cn
  • a51688@126.com
  • 2015-05-11
  • 上海市徐汇区龙漕路51弄
免责声明:

在本站发布的所有信息都由用户自行发布,信息中所表述的任何内容均与本站无任何关系,如果本站所展示的信息有侵犯到任何个人、企业或团体的权益,请与我们取得联系,并提供相应的证明文件,我们会尽最大努力保护您的权益。

置顶信息推广