用户名: 密码:  泵阀行业营销型网站建设
当前位置:网站首页 -> 水泵系列 >> 其他泵

进口冷凝泵(欧美进口十大品牌)发布时间:2018-08-03 11:27:56

关键词:进口冷凝泵

进口冷凝泵

英国GRIMM格林进口冷凝泵 UK GRIMM Inlet condensing pump

英国GRIMM格林进口冷凝泵概述:

            进口冷凝泵,GRN、GRNB型泵系单级单吸悬臂式离心冷凝泵。GRGN、GRGNL型泵系两级单吸离心式冷凝泵,适用于电厂,用来抽送冷凝器中的凝结水和750~3000kw汽轮发电机组抽送凝结水或物理、化学性质类似于水的其他液体之用。液体温度不超过80℃。泵进口压力不高于1.6MPa。

         GRN型冷凝泵主要由悬架、泵体、泵盖、叶轮、泵轴等部件组成。轴封采用软填料密封。

英国GRIMM格林进口冷凝泵结构说明:

1、品种:
      GRN型冷凝泵有卧式悬臂单级、两级、单级带诱导轮等结构形式,共有9个品种。单级的有GR3N6、GR4N6、GR100N130及GR100N160;两级的有GR2.5N3×2、GR3N6×2、GR4N6×2,单级带诱导轮的有GR6N6、GR150N110。
2、部件材质:
泵体、泵盖:铸铁、不锈钢
叶轮:硅黄铜(铝铁青铜),铸铁(第二级)
密封环、轴套、衬套:耐磨zt诱导轮:铝铁青铜
轴:优质碳素钢
3、支承部分:
      三个品种支承部分结构相同,主要件有托架、前后轴承压盖和轴组合定位在托架上的前后径向滚珠铀承上,滚球铀承亦承受未被平衡的轴向力。用稀油润滑,油量可从油标看出。前后轴承压盖均装有毛毡密封圈做为轴封以防漏油。管堵处的孔用来灌油。清洗换油时从丝孔将油放出。
4、密封和传动:
      轴采用软填料密封,在轴封处装有可更换的轴套。
      泵通过弹性联铀器由电动机驱动。从传动方向看,泵为逆时针方向旋转。

英国GRIMM格林进口冷凝泵特点:

1、高吸入性能,即具备良好的气蚀性能。

2、泵的效率高,有稳定又平稳的流量-扬曲线。
3、小型化程度高,结构紧凑战地面积小。

4、运行可靠性高,结构合理,便于拆装维修。

英国GRIMM格林进口冷凝泵主要参数:

流       量:8-140m3/h 

扬       程:37.7-143m

口       径:50-150mm

转       速:2950r/min

功       率:5.5-75kw

工作压力:1.6MPa

工作温度:-20~80℃

英国GRIMM格林进口冷凝泵用途:

          一般用于火力发电机组,供抽送冷凝器中的冷凝水或物理、化学性质类似于水的其他液体之用,也可用于给排水、化工、石化等行业中要求有高吸入性能的场合。

UK GRIMM Inlet condensing pump summary:

           Imported condensate pumps, GRN and GRNB pumps are single stage single suction overhung centrifugal condensing pumps. GRGN, GRGNL series two stage single suction centrifugal condensate pump, suitable for power plant, pumping water from the condenser to condense and 750 ~ 3000kW turbine pumping liquid condensed water or other physical and chemical properties similar to water use. Liquid temperature is not more than 80 degrees centigrade. The pump inlet pressure is not higher than 1.6MPa.

        GRN condensate pump mainly by suspension, pump body, pump cover, impeller, pump shaft and other components. Seal adopts soft packing seal.

UK GRIMM Inlet condensing pump structure description:

1.Varieties:

   GRN condensate pump has horizontal suspension, single stage, two stage, single stage pulley and so on. There are 9 varieties. The single stage has GR3N6, GR4N6, GR100N130 and GR100N160; the two stage has GR2.5N3 * 2, GR3N6 * 2, GR4N6 * 2, and single stage induction wheels he GR6N6 and GR150N110.

2.Part material:

Pump body, pump cover: cast iron, stainless steel

Impeller: silicon, brass (aluminum, iron, bronze), cast iron (grade second)

Sealing rings, bushings and bushings: wear-resistant ZT inducer: aluminum, iron, bronze

Axle: high quality carbon steel

3.Support part:

   The supporting parts of the three varieties he the same structure. The main parts are a bracket, front and rear bearings, gland and shaft, which are positioned on the front and rear radial ball bearings of the bearing, and the ball bearing uranium bearing is also subjected to unbalanced axial forces. Lubrication with thin oil, the amount of oil can be seen from the oil mark. The front and rear bearing gland are all equipped with felt sealing ring as shaft seal to prevent oil leakage. A hole in a pipe that is used to fill oil. Remove oil from the wire hole when cleaning the oil.

4.Sealing and transmission:

   The shaft is made of soft packing, and replaceable shaft sleeve is installed at the shaft seal.

   The pump is driven by an electric motor by means of an elastic uranium connected device. Viewed from the drive, the pump rotates counter clockwise.

UK GRIMM Inlet condensing pump characteristic:

1.High suction performance, that is, with good citation performance.

2.The pump efficiency is high, there is a stable and smooth flow - uplift curve.

3.Small size, compact structure, small battlefield area.

4.High reliability, reasonable structure, easy disassembly and maintenance.

UK GRIMM Inlet condensing pump technical parameter:

Flow rate: 8-140m3/h

Lift: 37.7-143m

Caliber: 50-150mm

Speed: 2950r/min

Power: 5.5-75kw

Working pressure: 1.6MPa

Operating temperature: -20~80 DEG C

UK GRIMM Inlet condensing pump purpose:

        Generally used for thermal power generating units, for pumping the condensed water in the condenser or the physical and chemical properties similar to water and other liquids used, can also be used for water supply and drainage, chemical, petrochemical and other industries require high suction performance occasions.

进口冷凝泵?官网:http://www.021fmc.cn/aspcms/product/2018-5-10/1339.html 

GRIMM中国:

    上海秉奇阀门有限公司GRIMM公司在中国的总代理,是中国拥有GRIMM代理权及销售权,主要为中国地区客户提供服务与技术支持,同时,秉奇人员也积极参与总部技术培训学习,并不断掌握产品原理、实际运作、工程技术做为基石,完善对中国地区客户需求。             

关于GRIMM

         英国格林(GRIMM)国际有限公司是亚太地区流体控制领域的主要生产和供应商之一,公司总部位于克莱福德,拥有一支有经验的研发队伍,实行全球统一设计,统一标准,在水泵领域内处于领先地位。在许多个国家均有生产水泵基地,中国由上海秉奇阀门负责中国市场各项业务与技术支持中心,同时向中国市场销售。

       英国格林(GRIMM)产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域,以及人们日常生活中。

       英国格林(GRIMM)主要产品有:管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。

服务体系:

GRIMM品质:

       GRIMM公司注重产品质量及使用寿命,全部采用先进制造技术和生产设备,并坚持不懈研发新产品,为确保不间断的全过程质量控制,在生产过程中采用(SPC)过程控制和(TQM)全面质量管理;GRIMM的严格规范实现了不让品质拖节,有效保障产品每个细节达到的性能指标。

GRIMM专业:

       掌握核心的流体控制技术,提供市场领先的产品、服务和解决方案,帮助用户提高效率,带来至关重要的基础设施。

GRIMM服务:

       我们与用户紧密合作,支持一系列系统使用技术和文件报告,提供售前、售中、售后服务和技术支持,有了您的信任与支持,我们将更完善、更高效提供水泵流体技术方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

About GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products he been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英国格林总代理商:上海秉奇阀门有限公司,微信咨询:

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:

 

Welcome new and old customers call negotiate!

Contacts:Huang Tianxiang

QQ:673088832

Mobile Phone:13524269805 (微信同号)

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District


搜索更多:进口冷凝泵

以下是上海秉奇泵阀有限公司信息发布人联系方式:

  • 免费企业会员
  • 上海秉奇泵阀有限公司
  • 进口隔膜泵,进口真空泵,进口潜污泵,进口计量泵,进口耐腐蚀泵
  • 黄天翔
  • 上海>>上海
  • 021-51698378
  • http://www.021fmc.cn
  • a51688@126.com
  • 2015-05-11
  • 上海市徐汇区龙漕路51弄
免责声明:

在本站发布的所有信息都由用户自行发布,信息中所表述的任何内容均与本站无任何关系,如果本站所展示的信息有侵犯到任何个人、企业或团体的权益,请与我们取得联系,并提供相应的证明文件,我们会尽最大努力保护您的权益。

置顶信息推广