用户名: 密码:  泵阀行业营销型网站建设
当前位置:网站首页 -> 水泵系列 >> 循环泵

进口卧式管道循环泵

英国GRIMM格林进口卧式管道循环泵 UK GRIMM Imported horizontal pipeline circulating pump

英国GRIMM格林进口卧式管道循环泵概述: 
    进口卧式管道循环泵是根据GRIS型离心泵与立式泵的独特结构组合设计,并严格按照国际标准ISO2858进行设计制造的高效节能产品。该系列泵采用英国格林先进水力模型优化设计而成。同时根据使用温度、介质等不同在GRISW型基础上派生出热水泵、高温泵、化工泵、油泵等,是目前英国格林定型推广产品。

英国GRIMM格林进口卧式管道循环泵特点:
1、结构紧凑。该系列泵为卧式结构,机泵一体、外形美观、占地面积少,与普通卧式泵比较,占地面积减少30%。如采用IP54户外电机则无需泵房,可置于户外使用。
2、运行平稳、噪音低、组件同心度高。电机和泵直联,简化了中间结构,增加了运行的平稳性,叶轮具有极好的动静平衡,运行时无振动、低噪音,延长了轴承的使用寿命,改善了使用环境。
3、轴封采用优质机械密封,动、静环由硬质合金制成,耐磨损、无泄漏、使用寿命长。
4、采用先进水力模型,具有效率高,性能好等特点。
5、结构独特。泵体下侧设有放水孔,进、出口法兰设有取压孔,能确保泵的正常使用和维护。
6、该系列卧式泵进口为水平方向,出口为垂直向上结构,便于管路布置。

英国GRIMM格林进口卧式管道循环泵工作条件:
1、泵系统最高工作压力为1.6MPa,即泵吸入口压力+泵扬程≤1.6MPa(泵系统工作压力高于1.6MPa时,应订货时另行提出,以便在制造时泵的过流部件和联接部件采用铸钢)。
2、输送介质为清水或屋里化学性质类似清水的其它液体(输送介质带有细小颗粒时,应在订货时另行提出,以便装配耐磨式机械密封)。
3、周围环境温度不超过40℃,海拔高度不超过1000m,相对湿度不超过95%。

英国GRIMM格林进口卧式管道循环泵结构说明:

          该机组由泵、电机和底座三部分组成。泵结构包括泵体、叶轮、泵盖、机械密封等零部件组成。泵为单级单吸卧式离心式,泵体和泵盖两部份是从叶轮背面处剖分的,即为后开门结构形式。大多数泵的叶轮前、后均设有密封环,并在叶轮后盖板上设有平衡孔,以平衡作用在转子上的轴向力。泵进口为轴向水平吸入,出口为垂直向上布置。泵和电机同轴,电机轴伸端采用双角接触球轴承结构可部分平衡泵的残余轴向力。泵与电机直联,安装时无需校正,具有共同底座,并用JG型隔振器进行隔振。

英国GRIMM格林进口卧式管道循环泵技术参数: 
流       量:1.1-1450m3/h
扬       程:7-150m
口       径:15-500mm
转       速:980-2900r/min
功       率:0.18-250kw
工作压力:≤1.6Mpa
电       压:380V 50Hz
材       质:铸铁、不锈钢

英国GRIMM格林进口卧式管道循环泵用途: 
          进口卧式管道循环泵,供输送清水及物理化学性质类似于清水的其他液体之用,适用于工业和城市给排水,高层建筑增压送水,园林喷灌,消防增压,远距离输送,暖通制冷循环、浴室等冷暖水循环增压及设备配套,使用温度T≤80℃。 

UK GRIMM Imported horizontal pipeline circulating pump summary:

           The imported horizontal pipeline circulating pump is designed according to the unique structure of GRIS centrifugal pump and vertical pump, and is designed and manufactured in strict accordance with the international standard ISO2858. This series of pumps is optimized by the advanced hydraulic model of Green, england. At the same time, according to the use of temperature, media and other differences in GRISW based on the derived hot water pump, high temperature pump, chemical pump, oil pump, etc., is the current British Green stereotypes promotion products.

UK GRIMM Imported horizontal pipeline circulating pump characteristic:

1.Compact structure. The series pump is horizontal structure, pump and pump integrated, beautiful appearance, small footprint, compared with the ordinary horizontal pump, covers an area of 30% reduction. If IP54 outdoor motor is used, no pump house can be used outdoors.

2.Smooth running, low noise and high concentricity of components. Direct motor and pump, simplify the intermediate structure, increasing the smooth running of the impeller with excellent static and dynamic balance, vibration free operation, low noise, prolong service life, improve the use of the environment.

3.Shaft seal adopts high quality mechanical seal. The moving and stationary ring is made of hard alloy. It is durable, no leakage and long service life.

4.Adopt advanced hydraulic model, with high efficiency, good performance and so on.

5.Unique structure. A water discharge hole is arranged at the lower part of the pump body, and the inlet and outlet flanges are provided with a pressure taking hole to ensure the normal use and maintenance of the pump.

6.The horizontal pump inlet of this series is horizontal direction, and the outlet is vertical upward structure, which is convenient for piping layout.

UK GRIMM Imported horizontal pipeline circulating pump working conditions:

1.Pump system maximum working pressure is 1.6MPa, the pump suction pressure + pump head is less than or equal to 1.6MPa (working pressure pump system is higher than 1.6MPa, should be presented when ordering, in order to manufacture pump over-current components and components connected with steel).

2.The transportation medium is clean water or other liquid with similar chemical properties in the house. (when the conveying medium contains small particles, it should be put forward in order to assemble wearable mechanical seal).

3.The ambient temperature is not more than 40 degrees, the elevation is not more than 1000m, relative humidity is not more than 95%.

UK GRIMM Imported horizontal pipeline circulating pump structure description:

          The unit is composed of three parts: pump, motor and pedestal. Pump structure, including pump body, impeller, pump cover, mechanical seals and other components. Pump for single-stage, single suction horizontal centrifugal, pump body and pump cover two parts from the back of the impeller split, that is, the back door structure. Most of the pump before and after the impeller is provided with a sealing ring, and a balance hole in the impeller hub, to balance the axial force acting on the rotor. The pump inlet is axially horizontal suction, and the outlet is vertically upward. The pump and motor are coaxial, and the double shaft angle contact ball bearing is used at the end of the motor shaft to balance the residual axial force of the pump. The pump is directly connected with the motor. When installing, the utility model does not need to be adjusted. The utility model has a common base and is used for vibration isolation with a JG type vibration isolator.

UK GRIMM Imported horizontal pipeline circulating pump technical Parameters:

Flow rate: 1.1-1450m3/h

Lift: 7-150m

Caliber: 15-500mm

Speed: 980-2900r/min

Power: 0.18-250kw

Working pressure: 1.6Mpa

Voltage: 380V 50Hz

Material: cast iron, stainless steel

UK GRIMM Imported horizontal pipeline circulating pump purpose:

           The import of circulating pump in horizontal pipeline, for the transport of water and physical and chemical properties similar to water and other liquids used, suitable for the industry and the city water supply and drainage, high-rise building pressurized water, garden irrigation, fire booster, long-range transport, HVAC refrigeration cycle, bathroom water pressurization and heating equipment supporting the use of temperature is less than or equal to 80 T C.

进口卧式管道循环泵?官网:http://www.021fmc.cn/aspcms/product/2018-5-10/1330.html 

GRIMM中国:

    上海秉奇阀门有限公司GRIMM公司在中国的总代理,是中国拥有GRIMM代理权及销售权,主要为中国地区客户提供服务与技术支持,同时,秉奇人员也积极参与总部技术培训学习,并不断掌握产品原理、实际运作、工程技术做为基石,完善对中国地区客户需求。             

关于GRIMM

         英国格林(GRIMM)国际有限公司是亚太地区流体控制领域的主要生产和供应商之一,公司总部位于克莱福德,拥有一支有经验的研发队伍,实行全球统一设计,统一标准,在水泵领域内处于领先地位。在许多个国家均有生产水泵基地,中国由上海秉奇阀门负责中国市场各项业务与技术支持中心,同时向中国市场销售。

       英国格林(GRIMM)产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域,以及人们日常生活中。

       英国格林(GRIMM)主要产品有:管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。

服务体系:

GRIMM品质:

       GRIMM公司注重产品质量及使用寿命,全部采用先进制造技术和生产设备,并坚持不懈研发新产品,为确保不间断的全过程质量控制,在生产过程中采用(SPC)过程控制和(TQM)全面质量管理;GRIMM的严格规范实现了不让品质拖节,有效保障产品每个细节达到的性能指标。

GRIMM专业:

       掌握核心的流体控制技术,提供市场领先的产品、服务和解决方案,帮助用户提高效率,带来至关重要的基础设施。

GRIMM服务:

       我们与用户紧密合作,支持一系列系统使用技术和文件报告,提供售前、售中、售后服务和技术支持,有了您的信任与支持,我们将更完善、更高效提供水泵流体技术方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

About GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products he been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英国格林总代理商:上海秉奇阀门有限公司,微信咨询:

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:

 

Welcome new and old customers call negotiate!

Contacts:Huang Tianxiang

QQ:673088832

Mobile Phone:13524269805 (微信同号)

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District


搜索更多:进口卧式管道循环泵

以下是上海秉奇泵阀有限公司信息发布人联系方式:

  • 免费企业会员
  • 上海秉奇泵阀有限公司
  • 进口隔膜泵,进口真空泵,进口潜污泵,进口计量泵,进口耐腐蚀泵
  • 黄天翔
  • 上海>>上海
  • 021-51698378
  • http://www.021fmc.cn
  • a51688@126.com
  • 2015-05-11
  • 上海市徐汇区龙漕路51弄
免责声明:

在本站发布的所有信息都由用户自行发布,信息中所表述的任何内容均与本站无任何关系,如果本站所展示的信息有侵犯到任何个人、企业或团体的权益,请与我们取得联系,并提供相应的证明文件,我们会尽最大努力保护您的权益。

置顶信息推广